Cam and groove couplings EN14420-7 Fed Mil A-A-59326A
The standard for cam & groove couplings has traditionally been based on US Military Specification Mil-C-27487. The Mil-C-27487 specification laid down the casting methods, materials, dimensions, tolerances, pressure ratings and inspection procedures.
The European Norm EN 14420-7 was approved by CEN on 30 September 2004, and applies to cam & groove couplings manufactured to American “military specification” MIL-C-27487 / A-A-59326A.
Cam and Groove Adapter EN14420-7
Cam and Groove Adapter female thread EN14420-7 CGA...
Cam and Groove adapter with female thread, EN ISO 228-1 from 1/2' up to 8' available in stainless steel 316, aluminium, brass and polypropylene.
Other threads on demand.
Cam and Groove Adapter male thread EN14420-7 CGFF...
Cam and Groove adapter with male thread, EN 10226-1 DIN2999-1, BSPT from 1/2' up to 8' available in stainless steel 316, aluminium, brass and polypropylene.
Other threads on demand.
Cam and Groove Adapter with shank EN14420-7 CGES...
Cam and Groove adapter with serrated shank and ground connection from 1/2' up to 8' available in stainless steel 316, aluminium, brass and polypropylene.
To be assembled with worm drive clamps, buckling, binding and band clamps.
Cam and Groove Male dust plug EN14420-7
Cam and Groove male dust plug from 1/2' up to 8' available in stainless steel 316, aluminium, brass and polypropylene.
Cam and Groove Coupler EN14420-7
Cam and Groove Coupler female thread EN14420-7 CGD...
Cam and Groove coupler with female thread, EN ISO 228-1 from 1/2' up to 8' available in stainless steel 316, aluminium, brass and polypropylene.
Other threads on demand.
Cam and Groove Coupler male thread EN14420-7 CGBF...
Cam and Groove coupler with male thread, EN 10226-1 DIN2999-1, BSPT from 1/2' up to 8' available in stainless steel 316, aluminium, brass and polypropylene.
Other threads on demand.
Cam and Groove Coupler with shank EN14420-7 CGCS...
Cam and Groove coupler with serrated shank and ground connection from 1/2' up to 8' available in stainless steel 316, aluminium, brass and polypropylene.
To be assembled with worm drive clamps, buckling, binding and band clamps.
Cam and Groove Female dust cap EN14420-7
Cam and Groove female dust cap from 1/2' up to 8' available in stainless steel 316, aluminium, brass and polypropylene.
Cam and Groove butt welding coupler and adapter EN14420-7
Cam and Groove welding adapter EN14420-7 CGAW...
Cam and Groove adapter with but welding end EN14420-7 from 1/2' up to 6' available in stainless steel 316. The butt welding connection consists of a 30° welding end S40.
Socket weld on demand.
Cam and Groove welding coupler EN14420-7 CGDW...
Cam and Groove coupler with but welding end EN14420-7 from 1/2' up to 6' available in stainless steel 316. The butt welding connection consists of a 30° welding end S40.
Socket weld on demand.
Cam and Groove accessories EN14420-7
Cam and Groove gaskets EN14420-7 CGX...
Cam and Groove gaskets EN14420-7 from 1/2' up to 8' available in buna, EPDM, Viton, NBR/PTFE, EPDM/PTFE, Viton/PTFE Dynaflon/PTFE, Silicone/PTFE.
Ohter materials on demand.
Cam and Groove handles EN14420-7 CGH...
Cam and Groove handles EN14420-7 from 1/2' up to 8' available in forged brass.
Stainless steel on demand.
C&G Stainless steel
Cam and groove couplings in stainless steel quality
ASTM A666 Grade 316
DIN 17 440 Grade 1.4401 X5CrNiMo 17 10 2
BS970/4 grade 316S316
NF A35-579 grade Z6CND17.11
C&G Aluminium
Cam and groove couplings in aluminium quality
ASTM B85 grade 380
DIN 1725 grade GD-AlSi9Cu3
BS 1490 grade LM24
C&G Brass
Cam and groove couplings in brass quality
ASTM B584 grade C85700 copper alloy
DIN 1709 grade CuZn37Pb
BS1400 grade DCB3
NF A53-703 grade UZ40Y30
C&G Polypropylene
It’s to state that the polypropylene cam & groove couplings of Verb are made of 25-30% fiberglass reinforcement
